News
QUICK LASER has concluded from years of experience in the laser fiber cutting machine that if you want to extend the service life of the fiber laser cutting machine cutting head, you can use masking tape to encapsulate the upper end of the cutting head after the installation and commissioning of the new laser cutting machine. The purpose of this is to effectively prevent dust and pollution, which is more conducive to the protection of fiber laser cutting machine cutting head.
Before starting the machine every day, it is necessary to check whether the laser is emitted from the center of the nozzle of the fiber laser cutting head. If there is any deviation, it is necessary to adjust the light in time and re locate the cutting reference point. If the reference point is correct, the focus of the optical path will be accurate, the cutting efficiency will be more efficient, and the cutting quality of the cutting workpiece will be more guaranteed.
Regularly check and clean the ceramic body and ceramic ring of fiber laser cutting machine cutting head. To ensure that the ceramic body or ceramic ring, ceramic body, ceramic ring and nozzle on the fiber laser cutting machine cutting head are smooth, clean and tidy, which is also an important factor to ensure the efficiency and quality of laser cutting. In case of any foreign matter or dirt, use a cotton swab dipped in isopropyl alcohol to clean it.
Regularly check the lens of protective glasses related to fiber laser cutting machine cutting head. All kinds of fiber laser cutting heads produced by QUICK LASER have upper and lower protective lenses. The main function of the upper protective lenses is to prevent dust and other foreign matters from falling onto the focusing lens set of the cutting head, and the role of the lower protective lenses is to prevent the cutting head from being polluted by foreign matters such as cutting debris. Regularly check whether the protective lenses have dirt, patterns or water mist. In case of any of the above situations, you can dip in isopropyl alcohol for cleaning. If the cleaning is not clean, the upper and lower protective lenses need to be replaced in time.
Post time: Aug-31-2023
